taproot-manufacturing/job-compiler
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

remove old non-modular recipe

Browse source
This commit is contained in:
Sebastian Kuzminsky 2025-02-09 11:42:48 -07:00
parent 4bdb08f9a3
commit 5cf35ca450
1 changed files with 0 additions and 158 deletions
Download patch file Download diff file Expand all files Collapse all files

158
recipes/peristaltic-pump.recipe
View file

@ -1,158 +0,0 @@
[[step.0.inputs]]
name = "bearing_hub_top"
type = "printed"
model = "https://github.com/DerSchultze/Peristaltic-Controller@92a4d9b:stl/bearing-hub-top.STL"
[[step.0.inputs]]
name = "bearing_hub"
type = "printed"
model = "https://github.com/DerSchultze/Peristaltic-Controller@92a4d9b:stl/bearing-hub.STL"
[[step.0.inputs]]
type = "M4x20 SHCS"
quantity = 3
comment = """These will hold the bearing rollers. Possibly Button Heads
Cap Screws would be better? Probably either will work fine."""
[[step.0.inputs]]
type = "M4 washer"
quantity = 6
dimensions = "12 mm OD, 4.4 mm ID, 1 mm thick"
comment = """The upstream repo calls for 12 mm OD but i think that's
too big, it hits the outer race of the bearings. Use 8mm OD instead."""
[[step.0.inputs]]
type = "624 bearing"
quantity = 6
comments = "13mm OD, 4mm ID, 5mm wide"
[[step.0.inputs]]
type = "M4 nuts"
quantity = 3
[step.0]
tools = [
"3 mm hex driver",
"7 mm nut driver",
]
process = """Assemble the bearing roller. Each of the three roller
stacks will consist of: washer, bearing, bearing, washer. All three
roller stacks are clamped between the bearing hub top and bottom, and
fixed by a screw and nut."""
output = "bearing_roller"
[[step.1.inputs]]
name = "pump_housing_rear_untapped"
type = "printed"
model = "https://github.com/DerSchultze/Peristaltic-Controller@92a4d9b:stl/CheapPump.STL"
[step.1]
tools = [ "M4 tap" ]
process = """Tap the two motor mounting holes."""
output = "pump_housing_rear"
[[step.2.inputs]]
name = "pump_housing_rear"
[[step.2.inputs]]
type = "M4x5 SHCS"
quantity = 2
[[step.2.inputs]]
type = "stepper, J8BYJ-48"
info = [
"https://www.mouser.com/datasheet/2/758/stepd-01-data-sheet-1143075.pdf",
"https://components101.com/motors/28byj-48-stepper-motor",
]
[step.2]
tools = [ "3 mm hex driver" ]
process = """Screw the stepper to the printed rear housing."""
output = "pump_housing_rear_with_stepper"
[[step.3.inputs]]
name = "pump_housing_front_untapped"
type = "printed"
model = "https://github.com/DerSchultze/Peristaltic-Controller@92a4d9b:stl/pump-top.STL"
[step.3]
tools = [ "M4 tap" ]
process = """Tap the two motor mounting holes."""
output = "pump_housing_front"
[[step.4.inputs]]
name = "pump_housing_front"
[[step.4.inputs]]
type = "M4x5 SHCS"
quantity = 2
[[step.4.inputs]]
type = "stepper, J8BYJ-48"
[step.4]
tools = [ "3 mm hex driver" ]
process = """Screw the stepper to the printed front housing."""
output = "pump_housing_front_with_stepper"
[[step.5.inputs]]
name = "pump_housing_front_with_stepper"
[[step.5.inputs]]
name = "bearing_roller"
[[step.5.inputs]]
type = "silicone tubing, 6mm OD, 4mm ID"
quantity = "1 meter"
comment = "PVC tube isn't flexible enough. Adjust quantity to suit your application."
[[step.5.inputs]]
name = "pump_housing_rear_with_stepper"
[[step.5.inputs]]
name = "tube_support"
type = "printed"
model = "https://github.com/DerSchultze/Peristaltic-Controller@92a4d9b:stl/tube-support.STL"
[[step.5.inputs]]
name = "m4_25_bhcs"
type = "M4x25 BHCS"
quantity = 4
comment = """BHCS is preferred over SHCS so the screw heads sit recessed
below the surface of the pump body."""
[[step.5.inputs]]
type = "M4 nuts"
quantity = 4
[step.5]
tools = [ "3 mm hex driver" ]
process = """Press the bearing roller assembly onto the motor shaft of the
rear pump housing assembly. Install the tubing so it goes in one port,
around the roller, and out the other port. Press the motor shaft of the
front pump housing assembly into the other side of the bearing roller.
Attach with the screws and nuts."""
output = "peristaltic_pump"