From 5cf35ca45026a108a1d50a47e6c500401711834a Mon Sep 17 00:00:00 2001 From: Sebastian Kuzminsky Date: Sun, 9 Feb 2025 11:42:48 -0700 Subject: [PATCH] remove old non-modular recipe --- recipes/peristaltic-pump.recipe | 158 -------------------------------- 1 file changed, 158 deletions(-) delete mode 100644 recipes/peristaltic-pump.recipe diff --git a/recipes/peristaltic-pump.recipe b/recipes/peristaltic-pump.recipe deleted file mode 100644 index 23ddcdc..0000000 --- a/recipes/peristaltic-pump.recipe +++ /dev/null @@ -1,158 +0,0 @@ -[[step.0.inputs]] -name = "bearing_hub_top" -type = "printed" -model = "https://github.com/DerSchultze/Peristaltic-Controller@92a4d9b:stl/bearing-hub-top.STL" - -[[step.0.inputs]] -name = "bearing_hub" -type = "printed" -model = "https://github.com/DerSchultze/Peristaltic-Controller@92a4d9b:stl/bearing-hub.STL" - -[[step.0.inputs]] -type = "M4x20 SHCS" -quantity = 3 -comment = """These will hold the bearing rollers. Possibly Button Heads -Cap Screws would be better? Probably either will work fine.""" - -[[step.0.inputs]] -type = "M4 washer" -quantity = 6 -dimensions = "12 mm OD, 4.4 mm ID, 1 mm thick" -comment = """The upstream repo calls for 12 mm OD but i think that's -too big, it hits the outer race of the bearings. Use 8mm OD instead.""" - -[[step.0.inputs]] -type = "624 bearing" -quantity = 6 -comments = "13mm OD, 4mm ID, 5mm wide" - -[[step.0.inputs]] -type = "M4 nuts" -quantity = 3 - -[step.0] - -tools = [ - "3 mm hex driver", - "7 mm nut driver", -] - -process = """Assemble the bearing roller. Each of the three roller -stacks will consist of: washer, bearing, bearing, washer. All three -roller stacks are clamped between the bearing hub top and bottom, and -fixed by a screw and nut.""" - -output = "bearing_roller" - - -[[step.1.inputs]] -name = "pump_housing_rear_untapped" -type = "printed" -model = "https://github.com/DerSchultze/Peristaltic-Controller@92a4d9b:stl/CheapPump.STL" - -[step.1] - -tools = [ "M4 tap" ] - -process = """Tap the two motor mounting holes.""" - -output = "pump_housing_rear" - - -[[step.2.inputs]] -name = "pump_housing_rear" - -[[step.2.inputs]] -type = "M4x5 SHCS" -quantity = 2 - -[[step.2.inputs]] -type = "stepper, J8BYJ-48" -info = [ - "https://www.mouser.com/datasheet/2/758/stepd-01-data-sheet-1143075.pdf", - "https://components101.com/motors/28byj-48-stepper-motor", -] - -[step.2] - -tools = [ "3 mm hex driver" ] - -process = """Screw the stepper to the printed rear housing.""" - -output = "pump_housing_rear_with_stepper" - - -[[step.3.inputs]] -name = "pump_housing_front_untapped" -type = "printed" -model = "https://github.com/DerSchultze/Peristaltic-Controller@92a4d9b:stl/pump-top.STL" - -[step.3] - -tools = [ "M4 tap" ] - -process = """Tap the two motor mounting holes.""" - -output = "pump_housing_front" - - -[[step.4.inputs]] -name = "pump_housing_front" - -[[step.4.inputs]] -type = "M4x5 SHCS" -quantity = 2 - -[[step.4.inputs]] -type = "stepper, J8BYJ-48" - -[step.4] - -tools = [ "3 mm hex driver" ] - -process = """Screw the stepper to the printed front housing.""" - -output = "pump_housing_front_with_stepper" - - -[[step.5.inputs]] -name = "pump_housing_front_with_stepper" - -[[step.5.inputs]] -name = "bearing_roller" - -[[step.5.inputs]] -type = "silicone tubing, 6mm OD, 4mm ID" -quantity = "1 meter" -comment = "PVC tube isn't flexible enough. Adjust quantity to suit your application." - -[[step.5.inputs]] -name = "pump_housing_rear_with_stepper" - -[[step.5.inputs]] -name = "tube_support" -type = "printed" -model = "https://github.com/DerSchultze/Peristaltic-Controller@92a4d9b:stl/tube-support.STL" - -[[step.5.inputs]] -name = "m4_25_bhcs" -type = "M4x25 BHCS" -quantity = 4 -comment = """BHCS is preferred over SHCS so the screw heads sit recessed -below the surface of the pump body.""" - -[[step.5.inputs]] -type = "M4 nuts" -quantity = 4 - -[step.5] - -tools = [ "3 mm hex driver" ] - -process = """Press the bearing roller assembly onto the motor shaft of the -rear pump housing assembly. Install the tubing so it goes in one port, -around the roller, and out the other port. Press the motor shaft of the -front pump housing assembly into the other side of the bearing roller. -Attach with the screws and nuts.""" - -output = "peristaltic_pump"