33 lines
1 KiB
TOML
33 lines
1 KiB
TOML
[[inputs]]
|
|
pump_housing_front_with_stepper = {version = 0.1, quantity=1}
|
|
bearing_roller = {version=0.1, quantity=1}
|
|
pump_housing_rear_with_stepper = {version=0.1, quantity=1}
|
|
tube_support = {version=0.1, quantity=1}
|
|
|
|
[[inputs.silicone_tubing]]
|
|
type = "silicone tubing, 6mm OD, 4mm ID"
|
|
quantity = "1 meter"
|
|
comment = "PVC tube isn't flexible enough. Adjust quantity to suit your application."
|
|
|
|
[[inputs.m4_25_bhcs]]
|
|
name = "m4_25_bhcs"
|
|
type = "M4x25 BHCS"
|
|
quantity = 4
|
|
comment = """BHCS is preferred over SHCS so the screw heads sit recessed
|
|
below the surface of the pump body."""
|
|
|
|
[[inputs.m4_nuts]]
|
|
type = "M4 nuts"
|
|
quantity = 4
|
|
|
|
[[dependencies]]
|
|
tools = [ "3 mm hex driver" ]
|
|
operator = {skill="assembly"}
|
|
|
|
[[action]]
|
|
process = """Press the bearing roller assembly onto the motor shaft of the
|
|
rear pump housing assembly. Install the tubing so it goes in one port,
|
|
around the roller, and out the other port. Press the motor shaft of the
|
|
front pump housing assembly into the other side of the bearing roller.
|
|
Attach with the screws and nuts."""
|
|
|