sigil-03
b4e5967845
NOTE: some of this syntax isn't toml i don't think, so this should be treated more like pseudo-toml
46 lines
1.2 KiB
TOML
46 lines
1.2 KiB
TOML
[[outputs]]
|
|
bearing_roller = {quantity=6}
|
|
|
|
# inputs list, similar to a cargo.toml file
|
|
[[inputs]]
|
|
bearing_hub_top = {version=0.1, type="printed"}
|
|
bearing_hub = {version=0.1, type="printed"}
|
|
|
|
# alternate representation of an element of the inputs list
|
|
[[inputs.m4_20_shcs]]
|
|
type = "M4x20 SHCS"
|
|
quantity = 3
|
|
comment = """These will hold the bearing rollers. Possibly Button Heads
|
|
Cap Screws would be better? Probably either will work fine."""
|
|
|
|
[[inputs.m4_washer]]
|
|
type = "M4 washer"
|
|
quantity = 6
|
|
dimensions = "12 mm OD, 4.4 mm ID, 1 mm thick"
|
|
comment = """The upstream repo calls for 12 mm OD but i think that's
|
|
too big, it hits the outer race of the bearings. Use 8mm OD instead."""
|
|
|
|
[[inputs.624_bearing]]
|
|
type = "624 bearing"
|
|
quantity = 6
|
|
comments = "13mm OD, 4mm ID, 5mm wide"
|
|
|
|
[[inputs.m4_nuts]]
|
|
type = "M4 nuts"
|
|
quantity = 3
|
|
|
|
[[dependencies]]
|
|
tools = [
|
|
"3 mm hex driver",
|
|
"7 mm nut driver",
|
|
]
|
|
operator = {skill="assembly"}
|
|
|
|
|
|
[[action]]
|
|
process = """Assemble the bearing roller. Each of the three roller
|
|
stacks will consist of: washer, bearing, bearing, washer. All three
|
|
roller stacks are clamped between the bearing hub top and bottom, and
|
|
fixed by a screw and nut."""
|
|
|
|
|