docker/Dockerfile

@@ -1,25 +0,0 @@
-FROM debian:testing
-
-RUN ( \
-    set -e; \
-    apt-get -yq update; \
-    apt-get -yq install \
-        build-essential \
-        curl \
-        mdbook \
-        plantuml \
-        vim-nox \
-    ; \
-    apt-get clean; \
-)
-
-ENV RUSTUP_HOME=/opt/rustup
-ENV CARGO_HOME=/opt/cargo
-
-RUN ( \
-    set -e; \
-    curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y ; \
-    chmod 777 /opt/rustup /opt/cargo; \
-)
-
-ENV PATH="$PATH:$CARGO_HOME/bin"

modular-recipes/repos/minimal_hydroponics_setup/barb_fitting_1_2_inch.toml

@@ -1,12 +1,11 @@
 [inputs]
-capital = { quantity = { amount=2.59, unit="USDollar" } }
+capital = { quantity = { amount=5.75, unit="USDollar" } }
 
 [dependencies]
 operator = {skills=["vendor interaction"]}
 
 [action.purchase]
 vendor = [
-    "https://acmehydroponics.net/collections/plumbing/products/fill-drain-1-2-fitting",
     "https://www.ebay.com/itm/134772441988",
     "https://www.ebay.com/itm/251050375775?var=554293415440",
     "https://www.ebay.com/itm/251313018420",

modular-recipes/repos/minimal_hydroponics_setup/barb_fitting_1_inch.toml

@@ -1,11 +1,10 @@
 [inputs]
-capital = { quantity = { amount=2.49, unit="USDollar" } }
+capital = { quantity = { amount=15.19, unit="USDollar" } }
 
 [dependencies]
 operator = {skills=["vendor interaction"]}
 
 [action.purchase]
 vendor = [
-    "https://www.botanicare.com/products/fittings/",
+    "https://www.botanicare.com/products/fittings/"
-    "https://acmehydroponics.net/collections/plumbing/products/fill-drain-1-fitting"
 ]

modular-recipes/repos/minimal_hydroponics_setup/filter.toml

@@ -1,12 +0,0 @@
-[inputs]
-capital = { quantity = { amount=0.96, unit="USDollar" } }
-
-[dependencies]
-operator = {skills=["vendor interaction"]}
-
-[action.purchase]
-vendor = [
-    "https://acmehydroponics.net/collections/plumbing/products/screen-fitting-plumbing",
-    "https://hydrobuilder.com/products/grow1-ebb-flow-screen-fittings-pack-of-10",
-    "https://www.ebay.com/itm/256644061627"
-]

modular-recipes/repos/minimal_hydroponics_setup/nutrient_reservoir_lid.toml

@@ -2,11 +2,8 @@
 food_safe_bucket_lid = {}
 
 [dependencies]
-tools = [ "hack saw" ]
+tools = [ "hole saw" ]
 
 [action]
-process = """Use the holes drilled in the `plant_tray_basin` to mark
+process = """Drill three holes in the lid the right size to fit the 1
-the `food_safe_bucket_lid`.  Cut the lid to make room for the two barb
+inch tube, the 1/2 inch tube, and the pump's power cord through."""
-fittings, so the `plant_tray_basin` can sit in the lid comfortably.
-This cut will also make room for the `nutrient_pump` power cord to
-exit."""

modular-recipes/repos/minimal_hydroponics_setup/overflow_fitting.toml

@@ -1,12 +0,0 @@
-[inputs]
-barb_fitting_1_inch = {}
-riser = { quantity = { amount = 2 } }
-filter = {}
-
-[dependencies]
-operator = {skills=["assembly"]}
-
-[action]
-process = """
-Attach the risers and filter to the barb fitting.
-"""

modular-recipes/repos/minimal_hydroponics_setup/plant_tray.toml

@@ -1,15 +1,13 @@
 [inputs]
 plant_tray_basin = {}
 clay_pebble_grow_medium = { quantity = { amount=5, unit="Liter" } }
-pump_fitting = {}
+barb_fitting_1_inch = {}
-overflow_fitting = {}
+barb_fitting_1_2_inch = {}
 
 [dependencies]
 tools = [ "hack saw" ]
 
 [action]
-process = """
+process = """Attach the two fittings.
-* Attach the pump fitting.
+
-* Attach the overflow fitting.
+Add the grow medium."""
-* Add the grow medium.
-"""

modular-recipes/repos/minimal_hydroponics_setup/plant_tray_basin.toml

@@ -5,20 +5,10 @@ plant_tray_basin = { comment = "Alternatively use commercial plastic bus tubs."
 food_safe_5_gallon_bucket = {}
 
 [dependencies]
-tools = [ "hack saw", "step drill correct size for both barb fittings" ]
+tools = [ "hack saw", "step drill" ]
 
 [action]
-process = """
+process = """* Cut the top of the bucket off, leaving a kind of deep dish
+or bowl that will holds the plant growth medium and the plants.
 
-* Drill holes for the two fittings.  The holes should be pretty close
+* Drill holes for the two fittings."""
-together, but far enough apart that there's sufficient room for the nuts
-that compress the barb fitting gaskets.
-
-* Temporarily install the overflow fitting, and mark the wall of the
-bucket a few inches above the top of the overflow fitting.
-
-* Cut the top of the bucket off at the mark.  This leaves a kind of deep
-dish or bowl that will holds the plant growth medium and the plants.
-a few inches above the top of the overflow fitting.
-
-"""

modular-recipes/repos/minimal_hydroponics_setup/pump_fitting.toml

@@ -1,11 +0,0 @@
-[inputs]
-barb_fitting_1_2_inch = {}
-filter = {}
-
-[dependencies]
-operator = {skills=["assembly"]}
-
-[action]
-process = """
-Attach the filter to the barb fitting.
-"""

modular-recipes/repos/minimal_hydroponics_setup/riser.toml

@@ -1,11 +0,0 @@
-[inputs]
-capital = { quantity = { amount=0.97, unit="USDollar" } }
-
-[dependencies]
-operator = {skills=["vendor interaction"]}
-
-[action.purchase]
-vendor = [
-    "https://acmehydroponics.net/collections/plumbing/products/extension-fitting-plumbing",
-    "https://www.ebay.com/itm/256644065109"
-]

tools/src/bin/parser/main.rs

@@ -3,47 +3,26 @@ use clap::Parser;
 #[derive(Debug, clap::Parser)]
 #[command(version, about, long_about = None)]
 struct Args {
-    /// Directories containing repos, eg "../my-repos".
+    /// The name of the recipe to build.
+    target: String,
+
+    /// Directories containing repos.
     #[arg(short, long)]
+    // repo: String,
     repo: Vec<String>,
-
-    /// Type of behavior/output.
-    #[command(subcommand)]
-    command: Commands,
-}
-
-#[derive(clap::Subcommand, Debug)]
-enum Commands {
-    /// Produce an mdbook of the specified recipe.
-    Mdbook {
-        /// The name of the recipe to create MD Book for, eg "my_widget".
-        target: String,
-    },
-    /// Show parsed recipe, probably not very useful.
-    Info {
-        /// The name of the recipe to show info for, eg "my_widget".
-        target: String,
-    },
 }
 
 fn main() -> anyhow::Result<()> {
     let args = Args::parse();
-
+    // let repo = tools::Repo::new(&args.repo).unwrap();
+    // repo.compile(&args.target)?;
     let mut repos = tools::Repos::default();
     for repo_path in &args.repo {
         repos.add_repo(repo_path)?;
     }
 
-    match &args.command {
+    let build_plan = repos.compile(&args.target)?;
-        Commands::Mdbook { target } => {
-            let build_plan = repos.compile(target)?;
     build_plan.make_mdbook()?;
-        }
-        Commands::Info { target } => {
-            let recipe = repos.get_recipe(target)?;
-            println!("{:#?}", recipe);
-        }
-    }
 
     Ok(())
 }

tools/src/build_plan.rs

@@ -215,8 +215,6 @@ impl<'a> BuildPlan<'a> {
         writeln!(bom_md_file, "# Bill of materials")?;
         writeln!(bom_md_file, "")?;
 
-        let mut total_cost: f32 = 0.0;
-
         let mut names: Vec<&String> = self.bom.keys().collect();
         names.sort();
         for name in names {
@@ -228,14 +226,13 @@ impl<'a> BuildPlan<'a> {
                 )))?;
             let recipe = self.repos.get_recipe(name)?;
             let unit_cost = recipe.unit_cost()?;
-            let item_total_cost = unit_cost * item.quantity.amount;
+            let total_cost = unit_cost * item.quantity.amount;
-            total_cost += item_total_cost;
             writeln!(bom_md_file, "* {name}")?;
             writeln!(bom_md_file, "    * quantity {:?}", item.quantity)?;
             writeln!(
                 bom_md_file,
                 "    * cost {:.2} ({:.2} each)",
-                item_total_cost, unit_cost
+                total_cost, unit_cost
             )?;
             writeln!(bom_md_file, "    * vendors:")?;
             match &recipe.action {
@@ -253,9 +250,6 @@ impl<'a> BuildPlan<'a> {
             }
         }
 
-        writeln!(bom_md_file, "")?;
-        writeln!(bom_md_file, "Total cost: {:.2}", total_cost)?;
-
         writeln!(
             summary_md_file,
             "    - [Bill of Materials](overview/bom.md)"