taproot-manufacturing/job-compiler
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

minimal_hydroponics_setup: improve plant_tray_basin

Browse source
This commit is contained in:
Sebastian Kuzminsky 2025-05-26 15:58:17 -06:00
parent e1a120dda6
commit 375fd51a45
1 changed files with 11 additions and 6 deletions
Download patch file Download diff file Expand all files Collapse all files

17
modular-recipes/repos/minimal_hydroponics_setup/plant_tray_basin.toml
View file

@ -8,12 +8,17 @@ food_safe_5_gallon_bucket = {}
tools = [ "hack saw", "step drill correct size for both barb fittings" ] tools = [ "hack saw", "step drill correct size for both barb fittings" ]
[action] [action]
process = """* Cut the top of the bucket off, leaving a kind of deep dish process = """
or bowl that will holds the plant growth medium and the plants. It should
extend a couple of inches above the top of the grow medium and net pots,
and above the top of the overflow valve. In fact, it might be good if
the plant tray basin is big enough to hold *all* the nutrient solution.
* Drill holes for the two fittings. The holes should be pretty close * Drill holes for the two fittings. The holes should be pretty close
together, but far enough apart that there's sufficient room for the nuts together, but far enough apart that there's sufficient room for the nuts
that compress the barb fitting gaskets.""" that compress the barb fitting gaskets.
* Temporarily install the overflow fitting, and mark the wall of the
bucket a few inches above the top of the overflow fitting.
* Cut the top of the bucket off at the mark. This leaves a kind of deep
dish or bowl that will holds the plant growth medium and the plants.
a few inches above the top of the overflow fitting.
"""